Open Cheat Tables

Game Name:Final Fantasy XVI
Game Engine:Proprietary Engine
Game Version:1.03
Game Vender:steam
Options Required:code work no random battle and other things thanks
Steam Website:
Other Info:

I was an experienced table maker (not for any website) but I don’t how to do anything fancy. You should be able to find random encounters this way with cheat engine.
1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do your next scan for less then.
6: repeat steps 4 and 5.

Note: if that doesn’t work then the value is increasing so try this.

1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do you next scan for greater then.
6: repeat steps 4 and 5.
Once you find the right value, click on it to add it to your table, then set the value to 0 if decreasing or to the highest if increasing and freeze the cheat and there you go, no encounters.
Hopefully you will only have a few results before an encounter and you can watch the values change on cheat engine to know which one is right.
Sorry I can’t help you better.

please is possible explain better all in video youtube with find code static with pointer thanks

JustcallmemrX wrote: Mon Mar 10, 2025 4:59 pm

I was an experienced table maker (not for any website) but I don’t how to do anything fancy. You should be able to find random encounters this way with cheat engine.
1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do your next scan for less then.
6: repeat steps 4 and 5.

Note: if that doesn’t work then the value is increasing so try this.

1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do you next scan for greater then.
6: repeat steps 4 and 5.
Once you find the right value, click on it to add it to your table, then set the value to 0 if decreasing or to the highest if increasing and freeze the cheat and there you go, no encounters.
Hopefully you will only have a few results before an encounter and you can watch the values change on cheat engine to know which one is right.
Sorry I can’t help you better.

rpgcollectors wrote: Tue Mar 11, 2025 4:52 am

please is possible explain better all in video youtube with find code static with pointer thanks

JustcallmemrX wrote: Mon Mar 10, 2025 4:59 pm

I was an experienced table maker (not for any website) but I don’t how to do anything fancy. You should be able to find random encounters this way with cheat engine.
1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do your next scan for less then.
6: repeat steps 4 and 5.

Note: if that doesn’t work then the value is increasing so try this.

1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do you next scan for greater then.
6: repeat steps 4 and 5.
Once you find the right value, click on it to add it to your table, then set the value to 0 if decreasing or to the highest if increasing and freeze the cheat and there you go, no encounters.
Hopefully you will only have a few results before an encounter and you can watch the values change on cheat engine to know which one is right.
Sorry I can’t help you better.

Finding static pointers with the cheat engine pointer scan is difficult depending on the game as sometimes you will have to try different settings to finally get a static address.
If it’s a mono game, then you can use mono dissect
To find static address instead of using a pointer scan.
I am just an experienced CE hacker, I hope an expert CE hacker on here can help you more soon, sorry.
Do a google search for “cheat engine Beginners Tutorial Understanding and Finding Pointers” and see if any YouTube videos will help you for now.
Right now my gaming computer is down, so I have no way right to hack games. Sorry again I couldn’t help more.

please how to find mono dissect with cheat engine version 7.6 thanks ?

JustcallmemrX wrote: Tue Mar 11, 2025 5:49 am

rpgcollectors wrote: Tue Mar 11, 2025 4:52 am

please is possible explain better all in video youtube with find code static with pointer thanks

JustcallmemrX wrote: Mon Mar 10, 2025 4:59 pm

I was an experienced table maker (not for any website) but I don’t how to do anything fancy. You should be able to find random encounters this way with cheat engine.
1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do your next scan for less then.
6: repeat steps 4 and 5.

Note: if that doesn’t work then the value is increasing so try this.

1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do you next scan for greater then.
6: repeat steps 4 and 5.
Once you find the right value, click on it to add it to your table, then set the value to 0 if decreasing or to the highest if increasing and freeze the cheat and there you go, no encounters.
Hopefully you will only have a few results before an encounter and you can watch the values change on cheat engine to know which one is right.
Sorry I can’t help you better.

Finding static pointers with the cheat engine pointer scan is difficult depending on the game as sometimes you will have to try different settings to finally get a static address.
If it’s a mono game, then you can use mono dissect
To find static address instead of using a pointer scan.
I am just an experienced CE hacker, I hope an expert CE hacker on here can help you more soon, sorry.
Do a google search for “cheat engine Beginners Tutorial Understanding and Finding Pointers” and see if any YouTube videos will help you for now.
Right now my gaming computer is down, so I have no way right to hack games. Sorry again I couldn’t help more.

rpgcollectors wrote: Tue Mar 11, 2025 6:02 am

please how to find mono dissect with cheat engine thanks ?

Do a google search for this, “cheat engine mono dissector beginners tutorial”

I’m not trying to be mean when saying this, but you might want to stick to learning pointer scans first if you really are a novice. I found learning mono dissect is harder than pointer scans and I think you will want to start with pointer scans.

is possble force activate mono feature with cheat engine 7.6 thanks ?

thanks for tutorial please and after how to find static code and add pointer for no random battle with cheat engine please add screenshot and tutorial thanks

JustcallmemrX wrote: Mon Mar 10, 2025 4:59 pm

I was an experienced table maker (not for any website) but I don’t how to do anything fancy. You should be able to find random encounters this way with cheat engine.
1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do your next scan for less then.
6: repeat steps 4 and 5.

Note: if that doesn’t work then the value is increasing so try this.

1: Walk around until you hit an encounter.
2: After you win the encounter don’t move on the map.
3: In cheat engine, do a 4 byte unknown scan.
4: On the map take 1 or 2 steps.
5: in cheat engine, do you next scan for greater then.
6: repeat steps 4 and 5.
Once you find the right value, click on it to add it to your table, then set the value to 0 if decreasing or to the highest if increasing and freeze the cheat and there you go, no encounters.
Hopefully you will only have a few results before an encounter and you can watch the values change on cheat engine to know which one is right.
Sorry I can’t help you better.

rpgcollectors wrote: Wed Mar 19, 2025 3:57 am

thanks for tutorial please and after how to find static code and add pointer for no random battle with cheat engine please add screenshot and tutorial thanks

I don’t have a computer right now, but I will try to help the best I can by finding a tutorial video so you can learn it. Once you get the hang of it, you can be proud that you can now do pointer scans.
Follow my instructions and once you add your address to your table, try this tutorial.
See if this tutorial helps. The guy talk with some kind of an accent, but I could understand him.

https://m.youtube.com/watch?v=8oC0w6WhZ1E

Can you create the code that works for me, as I don't know much about it?

JustcallmemrX wrote: Wed Mar 19, 2025 9:46 pm

rpgcollectors wrote: Wed Mar 19, 2025 3:57 am

thanks for tutorial please and after how to find static code and add pointer for no random battle with cheat engine please add screenshot and tutorial thanks

I don’t have a computer right now, but I will try to help the best I can by finding a tutorial video so you can learn it. Once you get the hang of it, you can be proud that you can now do pointer scans.
Follow my instructions and once you add your address to your table, try this tutorial.
See if this tutorial helps. The guy talk with some kind of an accent, but I could understand him.

https://m.youtube.com/watch?v=8oC0w6WhZ1E